<address id="t3fjz"></address>

        <form id="t3fjz"></form>

        HPLA 080 Belt Driven, Roller Wheel, Rodless Linear Actuator

        【產品特點】
        HPLA080 actuators incorporate a high strength timing belt, guided by low friction, heavy-duty roller wheels, inside a sealed housing. With load capacity to 3000N and speeds up to 5m/s, HPLA080's are optimized for high speed, single or multi-axis syste...
        電話:024-24821780 024-24820128
        手機:18525026592 18525026580 18525026591 13840329481 18698892334
        詳細介紹
        產品概況:

        The HPLA series of linear actuators is an extremely rugged and industrially hardened linear actuator that offers high speed, high acceleration, and long travel lengths, combined with a stiff, rigid construction. It is ideally suited for use in either single axis configurations or high speed, multi-axis gantry systems.  The HPLA carriage is rigidly supported on three sides by heavy duty, roller bearings housed inside of a rugged aluminum housing. The bearing wheels are pre-loaded to eliminate play in the system and strategically located along the carriage to evenly distribute load across the length of the carriage.                

        The HPLA's high strength, steel reinforced belt and pulley system provides fast, highly repeatable positioning of the carriage. The HPLA utilizes over-sized pulleys which allow the it to provide very high levels of thrust output relative to the profile size. The mounting of the belt to the carriage is designed to enable easy replacement of the belt without the need to remove the payload, while simultaneously providing a very rigid connection. Having a low coefficient of friction, the carriage design provides a high mechanical efficiency and long service life. Special carriage lengths and linear units with multiple carriages are available for custom applications.  

        HPLA080 Belt Driven, Roller Wheel, Rodless Linear Actuator Features:
        • Profile Width : 80mm
        • Steel roller bearing option for higher load capacities up 3023N
        • Thrust force capacities up to 1115N
        • Standard travel up to 5540mm (longer strokes available - consult factory)
        • Velocity up to 5 meters/sec
        • Positional repeatability of +/- 0.2mm
        • Rugged construction for heavy duty applications
        • Timing belt and pulley drive mechanism for fast, accurate positioning
        • Seal Strip (IP30) for additional environmental protection
        • Low wear and low particle generation (clean room suitable to class 100)
        • T-slot mounting along actuator body and carriage


        性能特點:

        系列   HPLA
        輪廓寬度(毫米)   80
        驅動類型   Belt
        軸承類型   Roller Wheel - Polyamide (Steel option for high load)
        最大沖程(毫米)   5540 (single profile) / 20000 (max by splicing)
        最大沖程(英寸)   218 (single profile) / 787 (max by splicing)
        最大速度(米/秒)   5
        最大速度(英寸/秒)   200
        最大加速度(米/ s2)   10
        最大加速度(英寸/ s2)   393
        最大推力FX (牛頓)   1115
        最大推力FX (磅)   251
        典型載荷FZ(N)   100 - 3023
        最大有效載荷FZ(牛頓)   1656 (Polyamide) | 3023 (Steel)
        位置可重復性(+ / -毫米)   0.2
        位置可重復性(+ / -英寸)   0.008
        惰輪單元選擇   Yes
        額外的保護選項   Steel Strip Cover
        耐腐蝕的選擇   Yes (stainless steel)
        證書   Cleanroom Certified (up to Class 100 / ISO Class 5)
        線性反饋裝置   Optional
        IP評級   IP30
        Copyright ? 沈陽創世榆力液壓設備有限公司 版權所有

        QQ咨詢

        咨詢熱線

        024-24821780????024-24820128
        18525026592 ????18525026580
        18525026591 ????13840329481
        18698892334
        7*24小時服務熱線

        關注微信

        掃一掃添加微信
        返回頂部
        来彩网 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>